RGB LED Controller is designed to control the colors and intensity of the RGB LED strip which is typically used for ambience lighting. RGB LED Controller requires an external 12V DC power supply and the RGB LED strip.

Sensor Monitor is designed to convert an existing wired sensor like smoke detector, gas leak detector etc. into a wireless sensor. The only requirement is that the wired sensor should have an ‘NO/NC’ trigger. SMHV also provides a 12V/100mA DC output which can be used to power the wired sensor.

In-wall Dual Switch Module allows automation of regular lights, power sockets and fans. IWS-2S comes with two switches of 6A rating. It is installed behind the existing switch plate and works in parallel with the mechanical switches.

eGlu Repeater module extends the range of eGlu wireless network. Normally most of the AC powered eGlu products can be configured to act like a repeater. In some cases existing powered devices can not be used as effective repeaters because of their position. In those cases, a stand alone repeater can be installed.

In-wall Triple Dimmer Module allows automation of dimmable lights and set lighting intensity. IWS-3D comes with three dimmers of 0.5A rating each. It is installed behind the wall switch plate and works in parallel with the mechanical switches. Each dimmer can also be used as an ON/OFF switch as long as the connected load is less than 0.5A.

Dual Relay Controller is a general purpose automation device. It contains two relays with voltage rating of 220V and current rating of 6A. The relays can take both AC and DC inputs for the given ratings. Dual Relay Controller also has the option to connect physical AC switches for the local control of the relays.

In-wall 16A Switch Module can be used to remotely control or automate high power appliances like geysers, air conditioners and motor pumps with maximum load up to 16A. It is installed behind the existing switch plate and works in parallel with the mechanical switch.

Curtain Controller lets you control your motorized window curtains as well as motorized main gates. It supports all the motors which use AC phase switching for open and close operations. Curtain Controller can support up to 6A of AC motor load. It also has an option to connect physical bell switches for local control.

Door Sensor helps in monitoring the opening and closing of the doors and windows. It also provides the real time state of the door/window on which it is installed. Apart from sensing door, it can also be used as a presence sensor or a remote button.