eGlu HUB-Pro acts as a communication gateway between all the eGlu devices, installed at your home, and the eGlu cloud server. It is powered by a 5V DC adaptor. HUB-Pro acts like a local server with in-built intelligence even when the internet is not available.  HUB-Pro comes with a built-in battery backup with an option to configure multiple Wi-Fi profiles. A push-button, provided at the back of HUB-Pro, can be used to re-configure the Wi-Fi settings.

Requirements

Sensor Monitor is designed to convert an existing wired sensor like smoke detector, gas leak detector etc. into a wireless sensor. The only requirement is that the wired sensor should have an ‘NO/NC’ trigger. SMHV also provides a 12V/100mA DC output which can be used to power the wired sensor.

RGB LED Controller is designed to control the colors and intensity of the RGB LED strip which is typically used for ambience lighting. RGB LED Controller requires an external 12V DC power supply and the RGB LED strip.

Dual Relay Controller is a general purpose automation device. It contains two relays with voltage rating of 220V and current rating of 6A. The relays can take both AC and DC inputs for the given ratings. Dual Relay Controller also has the option to connect physical AC switches for the local control of the relays.

Panic Alarm produces loud sound when turned on. It can be activated based on various events like intrusion, opening of a door or pressing of the panic button on the TAG. Panic Alarm is powered by batteries and can be conveniently placed on any flat surface or hung on a wall.

Yale Lock Controller is designed to remotely operate your Yale locks which are compatible with the K-type or N-type Yale receiver/transceiver modules. The Yale receiver module is installed in the lock and the Yale transmitter module is interfaced with the Yale Lock Controller, which also provides power to the transmitter module.

In-wall Dual Switch Module allows automation of regular lights, power sockets and fans. IWS-2S comes with two switches of 6A rating. It is installed behind the existing switch plate and works in parallel with the mechanical switches.

Curtain Controller lets you control your motorized window curtains as well as motorized main gates. It supports all the motors which use AC phase switching for open and close operations. Curtain Controller can support up to 6A of AC motor load. It also has an option to connect physical bell switches for local control.

In-wall Triple Dimmer Module allows automation of dimmable lights and set lighting intensity. IWS-3D comes with three dimmers of 0.5A rating each. It is installed behind the wall switch plate and works in parallel with the mechanical switches. Each dimmer can also be used as an ON/OFF switch as long as the connected load is less than 0.5A.

Triple Relay Controller is a general purpose automation device. It contains three relays with voltage rating of 220V and current rating of 3A each. The relays can take both AC and DC inputs for the given ratings.